DIY Stamped Lampshade...❥


This post is about my DIY Stamped Lightshade, 
 
So read on...
I found this little light shade in the bargain bin at Bed Bath & Beyond.
Only $18!
I've always wanted a lamp for my built in shelving in the Red Lounge,
but have never found one that fitted the width of the shelf.
But this little lamp was the perfect fit!
Plain white base with a cream linen type shade, I decided to add some stamped images to it.
This is how I did it...

For the first row of stamps I taped one inch spaces using a 2 inch wide sellotape.

The stamp I used was a simple poppy design by Stampin' Up.
The first ink colour was a red by Dewdrop Inks.
Press the ink over the stamp...

test on a similar type fabric as the shade first if you like as you want just the right amount of ink to avoid bleed.  

Carefully press stamps onto the fabric spaces between the sellotape.
Leave to dry 10 minutes.

Remove the tape and the stamp the design again in a different colour ink. This time I used a dark grey.  The pattern was red - upside down - Grey - right way up.
Leave 10 minutes to dry.

Then I used a cream white ink to colour in the internal parts of the poppy stamp.
Place the light shade onto the base, connect a light bulb, and put in place on the shelf.

So this is how it turned out...  
in traditional Japanese aesthetics, 
wabi sabi is a view that is centred on the acceptance of transience and imperfection.
The aesthetic is sometimes described as one of beauty that is imperfect, flawed impermanent or incomplete'.


I'm telling you this story because the lampshade is not perfect - I was a little heavy handed with the red dye. So there is some imperfection with bleeding into the fabric on a couple of the stamp impressions.  
Regardless -  I think it is still beautiful.
And when I decide to change the shade...
I already have a vision of another DIY project!

#homedecor #diy #lightshades #stamping

You might like to also visit:
My store at Fine Art America & Redbubble







A Sweet Autumn Crocus Bowl...❥


Undeniably Springlike Crocus are an Autumn flowering sweetie here in New Zealand.
But no matter where in the world you live, when crocus begin their flowering season, you too can create an indoor crocus bowl.

This decor arrangement is for a short term display.
You can enjoy the bulbs flowering in the bowl for two or three weeks before you will need to replant them into another pot for outside or into the garden.
Longer stems are encouraged by under-planting the bulbs beneath a shrub.
Mine were under an azalea before digging for use in this bowl.
If in full sun the flowers will  appear just above the much shorter strap like leaves.
I use a spray water bottle to keep the moss and soil damp in the bowl, but after initial planting the soaked soil is enough to keep moist so don't water it again in that first week..
Over watering will mean the bulbs will rot, and the leaves will yellow,
as a vintage leaf bowl like the one I have used has no drainage holes.

Here's how to create your Crocus Bowl:
Carefully Dig up your crocus bulbs from the garden.

Make wet mix of potting mix or garden soil.
Place in your bowl.

 Make a hollow and place your bulbs in the middle.
Hold with one hand while pushing soil around the bulbs and straighting them.

Use real moss or lichen as a cover layer on the soil.

Press the lichen or moss around and in between the planted bulbs.
This will also give them extra support to stand upright.
Then gently use a wet tissue to clean up the excess soil on the stems and the bowl.

In the wild the crocus grow in moist meadow situations.
So with bright light and afternoon sun on my lounge coffee table is a perfect position for the Crocus bowl.
And after moving here and there in my home, 
this is where it will stay.


#crocus #bulbs #indoorplanter #autumnbulbs

You might like to also visit:
My store at Fine Art America & Redbubble





DIY Farmhouse Vase Topper...❥

Do you have vases that you place the flowers in to and they instantly fall to the side.
Flower or foliage placement is a disaster as the stems just don't stay put?
Then your flower arrangement looks hickley pickley,
 and is not the fabulously arranged vision of beauty you had in your mind.

Do you enjoy Farmhouse styling?
Well here is an easy DIY solution to that flower arranging frustration!
Make a Farmhouse wire net vase topper.
Here's how...

You'll need a vase...
 This large decorative bowl leaks so I placed an internal vase inside it.

 You will need some chicken wire netting, and some wire cutters.
Also some gloves to protect your hands.

 Place the netting on top of the vase.
Cut the netting into a circle with a 3 centimetre excess.

 With gloved hands turn under the wire netting to make a finished edge.

 You can twist and blend all those loose wire ends or trim off.

 If you are using an internal vase in a larger vessel, fill with water.
Place your Farmhouse vase topper in place.
And prepare your chosen flowers.

Poke your trimmed flower and foliage stems into place through the holes in the wire netting.
The netting holds each stem in perfect position! 

Wire Vase Topper
Such a simple solution to holding the flowers and foliage stems in place.
The Farmhouse Vase topper makes for easy arrangements.
I truly wish I had made one DIY style before now.


#farmhouse #DIY #Flowerarranging #vasetopper

You might like to also visit:
My stores at Fine Art America

Bird Silhouette
& Redbubble 
for art prints, and gift ideas.

:)




Related Posts Plugin for WordPress, Blogger...